Skip to main content

Computer turns off without warning


Question

Computer turns off without warning.

Cause

This issue could be caused by any of the below possibilities.
  1. Heat related issue.
  2. Hardware issue or error.
  3. Computer virus.
  4. Issue with operating system.
  5. Other failing hardware

Answer

Caution: Some of the below steps require you open your computer. While in the computer, be cautious of ESD.
Heat related issue
A computer that turns off without warning is usually caused by a heat related issue. Many computers today are designed to turn off automatically if the computer, processor, or other device gets too hot.
Start by verifying the fan on the power supply is working by examining the back of the computer and seeing if the fan is moving and moving smoothly. For all other fans in the computer, you will need to open the computer and make sure the fan are working. While in the computer example the processor fan (heatsink), video card fans, and case fans. If you have heard any abnormal noises coming from your computer recently such as a high squealing, this is also a common indication of a fan failure.
Tip: While inside the computer it may also be a good idea toclean the inside of the computer. Dust, dirt, hair, and other residue in the vents and on the fans can prevent proper air flow and heat the computer.
Tip: If your BIOS monitors the RPM of the fans, enter BIOS and make sure the BIOS does not report any errors. Software utilities such as SpeedFan can also be used to help monitor fans in your computer.
While inside the computer, it's also a good idea to verify the processor heatsink is properly connected by disconnecting and reconnecting the heatsink. If the processor heatsink is not properly attached or does not have a proper amount of thermal compound, the computer will overheat.
Caution: If you do remove the processor heatsink the thermal compound on the processor and heatsink should be cleaned and new thermal compound should be applied. Not reapplying new thermal compound could make issues worse since the bond between the CPU and heatsink would be broken.
Hardware issue or error
Any failing hardware component in your computer could cause your computer to unexpectedly turn off without warning. If you have recently added any new hardware remove it from the computer to make sure it is not causing the problem.
Tip: Before attempting to remove any hardware, make sure you are not encountering this issue because of hardware conflicts bychecking Device Manager for errors.
If you have not recently installed any new hardware into the computer, the next best solution to determining if this is a hardware issue would be remove any hardware on the computer that is not needed. For example, remove your modem, network card, sound card, and any other expansion cards that are not needed for the computer to operate. Run the computer without these cards to see if they are the cause of your issue.
Computer virus
Although not as likely as the above reasons, it is possible for your computer to be infected with a virus that is designed to shut down your computer or turn it off. If your computer seems to be turning off when executing a certain program at specific times in the day, it could be infected.
If you believe your computer may be infected with a virus or are uncertain if your computer is infected with a virus, make sure yourvirus scanner definitions are up-to-date and it may also be a good idea to scan the computer for any other malware.
Issue with operating system
If after following each of the above recommendations your computer still continues to reboot, it is likely that you are experiencing a Microsoft Windows operating system related issue that cannot be explained. To help make sure this is the case, try the below steps.
  1. Reboot the computer and enter CMOS setup as the computer is booting.
  2. After you have loaded the computer in CMOS setup, let the computer sit.
If the computer does not turn off while letting the computer sit in CMOS, you are likely experiencing an issue with Microsoft Windows or your operating system and it is recommend you erase everything and reinstall Microsoft Windows.
Other failing hardware
If after reinstalling your operating system, or during the installation of your operating system, your computer turns off abnormally, it is very likely that other hardware is failing in the computer. Often this is RAMCPUMotherboardPower Supply, orVideo card (in that order).
If you have extra parts or have a friend or co-worker with a similar configuration that is willing to allow you to test their hardware in your computer, try swapping these parts to determine if they are at fault. Otherwise, you will need to have the computer serviced.

Additional information

Comments

Popular posts from this blog

How to Clear An Unknown BIOS/CMOS Password.

How to clear an unknown BIOS or CMOS password Question How to clear an unknown BIOS or CMOS password. Answer Tip:   The below steps are for a   desktop computer   and do not include steps on   how to clear a laptop CMOS password . If you encounter a password prompt at boot or the BIOS or CMOS setup is locked as shown below and you do not know the password you will need to clear the BIOS password using the suggestions listed below. Clear using jumper (recommended) Caution:   When inside the computer be sure you're aware of the potential damage that can be caused by ESD . On the computer motherboard   locate the BIOS clear or password   jumper   or dip switch   and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD as shown in the picture to the right. To change the jumper remove it from the two pins its currently on so that it covers the pin that is not covered. For example, in the picture to th

16 Common Computer Problems: How To Tell If They’re Hardware or Software

Can you recover quickly from disasters? Heres how you can be sure. 16 Common Computer Problems: How To Tell If They’re Hardware or Software You’re right in the middle of something and your computer starts acting up. Is it the app you’re working in or your device that’s the problem? Most problems are software problems. Some are definitely hardware problems. And some can be caused by one or the other. This chart lists 16 of the most common problems. Knowing where to start troubleshooting can save you lots of time. And if you need to call in the cavalry, you’ll know which customer service department to call. If you’re lucky, your problem is a software problem that can be easily resolved by running a repair utility or uninstalling and reinstalling if it’s a desktop app or logging off and on again if it’s a cloud app. To keep problems away, keep your software updated. To keep your computer clean and in good shape, pay attention when things seem weird so you can st